Turning induced residual stress prediction of AISI 4130 considering dynamic recrystallization

Abstract

ABSTRACTMachining-induced residual stress distribution is strongly influenced by the machining process condition, tool geometry and workpiece material mechanical properties. The high temperature, large strain and high strain rate environment will promote the material micro-structural attribute changes. The material micro-structural attribute changes could directly affect the material mechanical properties. An analytical model is proposed for the residual stress prediction in the orthogonal turning by considering the material dynamical recrystallization induced grain growth effect. The grain size effect on the material flow stress behavior is included by adding a grain size dependent term into the traditional Johnson–Cook model. The Johnson–Mehl–Avrami–Kolmogorov model calculates the recrystallized volume fraction and grain size as a function strain, strain rate and time. The average grain size is calculated with a rule of mixture by volume. Then the modified Johnson–Cook model is embedded into a classic residual stress prediction model for the machining induced residual stress profile prediction on the machined workpiece surface. Experimental tests are conducted for the model validation. The predicted residual stress shows good approximation with the measurement in both the trend and magnitude of the residual stress. Also, the effects of cutting speed and feed rate on the residual stress profile are investigated.