Turbulent mixed convection from a large, high temperature, vertical flat surface

Abstract

Listen

Translate article

Turbulent mixed convection heat transfer at high temperatures and large length scales is an important and seldom studied phenomenon that can represent a significant part of the overall heat transfer in applications ranging from solar central receivers to objects in fires. This work is part of a study to validate turbulence models for predicting heat transfer to or from surfaces at large temperature differences and large length scales. Here, turbulent, three-dimensional, mixed convection heat transfer in air from a large (3 m square) vertical flat surface at high temperatures is studied using two RANS turbulence models: a standard k– ε model and the v 2 ¯ – f model. Predictions for three cases spanning the range of the experiment (Siebers, D.L., Schwind, R.G., Moffat, R.F., 1982. Experimental mixed convection from a large, vertical plate in a horizontal flow. Paper MC13, vol. 3, Proc. 7th Int. Heat Transfer Conf., Munich; Siebers, D.L., 1983. Experimental mixed convection heat transfer from a large, vertical surface in a horizontal flow. PhD thesis, Stanford University) from forced ( Gr H / Re L 2 = 0.18 ) to mixed ( Gr H / Re L 2 = 3.06 ) to natural ( Gr H / Re L 2 = ∞ ) convection are compared with data. The results show a decrease in the heat transfer coefficient as Gr H / Re L 2 is increased from 0.18 to 3.06, for a free-stream velocity of 4.4 m/s. In the natural convection case, the experimental heat transfer coefficient is approximately constant in the fully turbulent region, whereas the calculated heat transfer coefficients show a slight increase with height. For the three cases studied, the calculated and experimental heat transfer coefficients agree to within 5–35% over most of the surface with the v 2 ¯ – f model results showing better agreement with the data. Calculated temperature and velocity profiles show good agreement with the data.