Abstract
AbstractA number of graft copolymers of xanthan gum and polyacrylamide have been synthesized by grafting acrylamide onto xanthan gum using the ceric‐ion‐initiated solution polymerization technique. The effects of various synthesis parameters such as amount of catalyst, reaction time, and ratio of xanthan and acrylamide on drag reduction effectiveness of the graft copolymers have been studied. The scaling up of grafting reaction has been accomplished in 40‐L reactor. The drag reduction effectiveness of the graft copolymers is investigated over a wide range of concentrations and Reynolds numbers. It is shown that the maximum drag reduction obtainable in xanthan gum solutions above 300 ppm can be obtained in solutions of graft copolymers at concentrations of 100–150 ppm. The grafting also improves the shear stability at higher Reynolds numbers. The shear stability of the graft copolymers at constant wall stress has been found to be superior to polyacrylamide and the mixtures of polyacrylamide and xanthan gum. In general, the shear stability of graft copolymers and polyacrylamide is shown to increase with concentration. The drag reduction characteristics and shear stability have been discussed in terms of structural features of the graft copolymers. The drag reduction characteristics of the graft copolymers are found to be similar to those of flexible polymers.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have