Abstract
AbstractThis research aims at building a turbulent diffusion combustion model based on chemical equilibrium and kinetics for simplifying a complex chemical mechanism. This paper presents the combustion model based on chemical equilibrium combined with an eddy dissipation concept model (CE‐EDC); the model is validated by simulating a H2‐air turbulent diffusion flame. In the CE‐EDC model, the reaction rate of fuels and intermediate species are estimated by using the equations of the EDC model. Then, the reacted fuels and intermediate species are assumed to be in chemical equilibrium; the amounts of the other species are determined by the Gibbs free energy minimization method by using the amounts of the reacted fuels, intermediate species, and air as reactants. An advantage of the CE‐EDC model is that the amounts of the combustion products can be determined without using detailed chemical mechanisms. Moreover, it can also predict the amounts of the intermediate species. The obtained results are compared with Takagi's experimental data and the data computed by the EDC model, which uses the complex chemical mechanisms. The mole fractions of H2, O2, H2O, temperature, and velocity obtained by using our CE‐EDC model were in good agreement with the reference data without taking into account the chemical reaction rates of the O2 and H2O. Furthermore, the mole fractions of OH and H are in good agreement with the results of the EDC model at high temperatures. On the other hand, the chemical equations involving OH and H were used for predicting the mole fractions of OH and H, which were similar to those obtained from the EDC model at low temperatures. Using the present CE‐EDC model, amounts of combustion products can be calculated by using a reduced chemical mechanism and the Gibbs free energy minimization theory. The accuracy of this model is in the same order as that of the EDC model. The CE‐EDC model uses reduced chemical mechanism concerning selected species, while the result of the chemical equilibrium calculation was employed to the other species; further, the accuracy of the CE‐EDC model is the same as that of the EDC model as to major species, T, U, and k. © 2010 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/htj.20296
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.