Abstract
This work presents a numerical study of coolant porous injection in hypersonic turbulent boundary layer, with an analysis of blowing ratio and pore diameter effects on the cooling performance. Direct numerical simulations (DNS) are carried out for a Mach 5 flow over a flat plate with induced transition, and with a porous injection model to mimic injection from a bed of equally-spaced circular pores. The cooling performance in turbulent flow is compared to laminar 2D flow cases. Results show downstream development of a turbulent wedge-shaped structure, where a dramatic decay of the near-wall coolant concentration is observed. Blowing ratio and pore size are seen to affect the calmed and transitional regions, however they have a marginal or negligible effect within the turbulent region. A cooling effectiveness deficit/reduction of 15% to 30% for the turbulent cases, with respect to the laminar 2D cases, is observed above the injection region due to the 3D flow effects associated with the porous injection, whereas it reaches values as high as 80% in the developed turbulent region due to the turbulent convective effects. The present results shed light on the effects of turbulence on porous wall cooling and clearly indicate that alternative (ad-hoc) injection strategies and parameter calibration are needed to guarantee appropriate wall cooling in a turbulent flow.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
