Abstract
The increase of aeroengine performance through the improvement of aerodynamic efficiency of core flow is becoming more and more difficult to achieve. However, there are still some devices that could be improved to enhance global engine efficiency. Particularly, investigations on the internal air cooling systems may lead to a reduction of cooling air with a direct benefit to the overall performance. At the same time, further investigations on heat transfer mechanisms within turbine cavities may help to optimize cooling air flows, saving engine life duration. This paper presents a computational fluid dynamics (CFD) study aimed at the characterization of the effects of different geometries for cooling air supply within turbine cavities on wall thermal effectiveness and sealing mass flow rate. Several sealing air supply geometries were considered in order to point out the role of cooling air injection position, swirl number, and jet penetration on the cavities’ sealing performance. Steady state calculations were performed using two different computational domains: the first consists of a sector model of the whole turbine including the second stator well, while the second is a cut-down model of the stator well. Thanks to the simplified geometry of the test rig with respect to actual engines, the study has pointed out clear design suggestions regarding the effects of geometry modification of cooling air supply systems.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have