Abstract

Nanomaterials for highly selective and sensitive sensors toward specific gas molecules of volatile organic compounds (VOCs) are most important in developing new-generation of detector devices, for example, for biomarkers of diseases as well as for continuous air quality monitoring. Here, we present an innovative preparation approach for engineering sensors, which allow for full control of the dopant concentrations and the nanoparticles functionalization of columnar material surfaces. The main outcome of this powerful design concept lies in fine-tuning the reactivity of the sensor surfaces toward the VOCs of interest. First, nanocolumnar and well-distributed Ag-doped zinc oxide (ZnO:Ag) thin films are synthesized from chemical solution, and, at a second stage, noble nanoparticles of the required size are deposited using a gas aggregation source, ensuring that no percolating paths are formed between them. Typical samples that were investigated are Ag-doped and Ag nanoparticle-functionalized ZnO:Ag nanocolumnar films. The highest responses to VOCs, in particular to (CH3)2CHOH, were obtained at a low operating temperature (250 °C) for the samples synergistically enhanced with dopants and nanoparticles simultaneously. In addition, the response times, particularly the recovery times, are greatly reduced for the fully modified nanocolumnar thin films for a wide range of operating temperatures. The adsorption of propanol, acetone, methane, and hydrogen at various surface sites of the Ag-doped Ag8/ZnO(0001) surface has been examined with the density functional theory (DFT) calculations to understand the preference for organic compounds and to confirm experimental results. The response of the synergistically enhanced sensors to gas molecules containing certain functional groups is in excellent agreement with density functional theory calculations performed in this work too. This new fabrication strategy can underpin the next generation of advanced materials for gas sensing applications and prevent VOC levels that are hazardous to human health and can cause environmental damages.

Highlights

  • Advanced nanomaterials for gas sensing applications that have been traditionally used to detect volatile organic compound (VOC) levels, which are hazardous to human health and can cause environmental damages, are of high demand

  • We developed a novel strategy to modulate the density of Ag nanoparticles uniformly on nonplanar zinc oxide (ZnO):Ag columnar films by a one-step sputtering method followed by thermal annealing at 350 °C

  • By elucidating the concerning mechanisms, we demonstrated the synergistic role of doping and surface functionalization using Ag nanoparticles in enhancing the gas sensing response and selectivity of semiconducting oxides, namely, ZnO, toward specific volatile organic compounds

Read more

Summary

INTRODUCTION

Advanced nanomaterials for gas sensing applications that have been traditionally used to detect volatile organic compound (VOC) levels, which are hazardous to human health and can cause environmental damages, are of high demand. We show that synergistically enhancing metal oxide surfaces using doping and noble nanoparticle functionalization is a promising approach for engineering gas sensor materials To demonstrate this new concept, the Ag-doped and Ag NP-decorated ZnO nanocolumnar films are investigated, over a wide range of operating temperatures, to determine experimentally which functionalization method is optimal for enhancing the gas sensing properties toward VOC vapors. We have examined the adsorption of propanol, acetone, methane, and hydrogen at various surface sites of the Agdoped Ag8/ZnO(0001) to understand its preference for organic compounds

EXPERIMENTAL SECTION
RESULTS AND DISCUSSION
CONCLUSIONS
■ ACKNOWLEDGMENTS
■ REFERENCES
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call