Tuning the Mechanical and Electrical Properties of Porous Electrodes for Architecting 3D Microsupercapacitors with Batteries-Level Energy.

Abstract

Microsupercapacitors (MSCs) are vital power sources for internet of things (IoTs) and miniaturized electronics. The performance of MSCs is often restricted by its low areal energy density, which is due to the low areal mass loading of active materials. Constructing thick planar microelectrode with fine structure and high aspect ratio is an efficient way to increase mass loading, but limited by the breakable nature of porous electrode materials. Here, it is found that the mechanical and electrical properties of porous electrodes, as well as their surface area utilization and internal ion diffusion pathway, can be synergistically tuned by infilling gel electrolyte into internal pores of porous electrode films. The tuned thick porous electrode films are robust enough to enable laser ablation of three dimensional (3D) microelectrodes for high mass loading and high aspect ratio. The areal capacitance of 3D microelectrodes is able to increase linearly with mass loading (or thickness) up to at least 13 mg cm−2 (or 260 µm) for a value of up to 4640 mF cm−2 based on active carbon. The 3D MSCs deliver areal energy density of 1318 μWh cm−2, which is comparable to the best of Li‐ion 3D microbatteries while exhibiting superior electrochemical and mechanical stability.