Tuning the Ferroelectric Response of Sandwich-Structured Nanocomposites with the Coordination of Ba0.6Sr0.4TiO3 Nanoparticles and Boron Nitride Nanosheets to Achieve Excellent Discharge Energy Density and Efficiency.

Abstract

With the rapid development of new electronic products and sustainable energy systems, there is an increasing demand for electrical energy storage devices such as electrostatic capacitors. In order to comprehensively improve the dielectric, insulating, and energy storage properties of PVDF-based composites, sandwich-structured composites were prepared by layer-by-layer solution casting. The outer layers of the sandwich structure composite are both PVDF/boron nitride nanosheet composites, and the middle layer is a PVDF/Ba0.6Sr0.4TiO3 nanoparticles composite. The structural and electrical properties of the sandwich-structured composites were characterized and analyzed. The results show that when the volume percentage of Ba0.6Sr0.4TiO3 nanoparticles in the middle layer of the sandwich structure composite is 1 vol.%, the dielectric properties are significantly improved. Its dielectric constant is 8.99 at 10 kHz, the dielectric loss factor is 0.025, and it has better insulating properties and resistance to electrical breakdown. Benefiting from the high breakdown electric field strength and the large maximum electrical displacement, the sandwich-structured composites with 1 vol.% and Ba0.6Sr0.4TiO3 nanoparticles in the middle layer show a superior discharge energy density of 8.9 J/cm3, and excellent charge and discharge energy efficiency of 76%. The sandwich structure composite achieves the goal of simultaneous improvement in breakdown electric field strength and dielectric constant.