Tuning the Extractive Properties of Purex Solvent using Room Temperature Ionic Liquid

Abstract

An Aliquat-336 based ionic liquid, namely, tri-n-octylmethylammonium bis(2-ethylhexyl)phosphate ([A3636]+[DEHP]−) was prepared and studied for the extraction of U(VI), Pu(IV), and Am(III) from nitric acid medium. Since the ionic liquid, [A336]+[DEHP]− was miscible in n-dodecane (n-DD), the extraction of these actinides in the PUREX solvent, 1.1 M tri-n-butylphosphate (TBP) in n-dodecane (n-DD), was investigated in the presence of small concentrations of ionic liquid. The distribution ratio of U(VI) and Am(III) in 0.03 M [A336]+[DEHP]−/n-DD decreased with increase in the concentration of nitric acid; whereas the extraction of Pu(IV) initially increased, it reached a maximum at 4 M nitric acid followed by the decrease. The extraction of actinides in ionic liquid medium decreased in the order Pu(IV) > U(VI) >> Am(III), indicating the feasibility of modifying the extractive properties of TBP/n-DD to favor Pu(IV) extraction. Therefore, the extraction of Pu(IV) in a solution of TBP – [A336]+[DEHP]− in n-DD was also studied. The distribution ratio of Pu(IV) increased with increase in the concentration of ionic liquid and decrease in the concentration of TBP in organic phase. The distribution ratio of Pu(IV) determined in the presence of small concentration of ionic liquid in 1.1 M TBP/n-DD was always much higher than that observed in 1.1 M TBP/n-DD. In contrast to this, the distribution ratio of U(VI) decreased by the addition of ionic liquid and Am(III) was inextractable even in the presence of ionic liquid.