Tuning the Electrical Properties of Si Nanowire Field‐Effect Transistors by Molecular Engineering

Abstract

Exposed facets of n-type silicon nanowires (Si NWs) fabricated by a top-down approach are successfully terminated with different organic functionalities, including 1,3-dioxan-2-ethyl, butyl, allyl, and propyl-alcohol, using a two-step chlorination/alkylation method. X-ray photoemission spectroscopy and spectroscopic ellipsometry establish the bonding and the coverage of these molecular layers. Field-effect transistors fabricated from these Si NWs displayed characteristics that depended critically on the type of molecular termination. Without molecules the source-drain conduction is unable to be turned off by negative gate voltages as large as -20 V. Upon adsorption of organic molecules there is an observed increase in the "on" current at large positive gate voltages and also a reduction, by several orders of magnitude, of the "off" current at large negative gate voltages. The zero-gate voltage transconductance of molecule-terminated Si NW correlates with the type of organic molecule. Adsorption of butyl and 1,3-dioxan-2-ethyl molecules improves the channel conductance over that of the original SiO(2)-Si NW, while adsorption of molecules with propyl-alcohol leads to a reduction. It is shown that a simple assumption based on the possible creation of surface states alongside the attachment of molecules may lead to a qualitative explanation of these electrical characteristics. The possibility and potential implications of modifying semiconductor devices by tuning the distribution of surface states via the functionality of attached molecules are discussed.