Abstract
Poly-l-lactide (PLLA) is a popular choice for medical devices due to its bioresorbability and superior mechanical properties compared with other polymers. However, although PLLA has been investigated for use in bioresorbable cardiovascular stents, it presents application-specific limitations which hamper device therapies. These include low toughness and strength compared with metals used for this purpose, and slow degradation. Blending PLLA with novel polyethylene glycol functionalised poly(l-lactide-co-ε-caprolactone) (PLCL-PEG) materials has been investigated here to tailor the mechanical properties and degradation behaviour of PLLA. This exciting approach provides a foundation for a next generation of bioresorbable materials whose properties can be rapidly tuned.The degradation of PLLA was significantly accelerated by addition of PLCL-PEG. After 30 days of degradation, several structural changes were observed in the polymer blends, which were dependent on the level of PLCL-PEG addition. Blends with low PLCL-PEG content displayed enthalpy relaxation, resulting in embrittlement, while blends with high PLCL-PEG content displayed crystallisation, due to enhanced chain mobility brought on by chain scission, also causing embrittlement. Moderate PLCL-PEG additions (10% PLCL(70:30)-PEG and 20–30% PLCL(80:20)-PEG) stabilised the structure, reducing the extent of enthalpy relaxation and crystallisation and thus retaining ductility. Compositional optimisation identified a sweet spot for this blend strategy, whereby the ductility was enhanced while maintaining strength.Our results indicate that blending PLLA with PLCL-PEG provides an effective method of tuning the degradation timescale and mechanical properties of PLLA, and provides important new insight into the mechanisms of structural relaxations that occur during degradation, and strategies for regulating these.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.