Tungsten-Doped Indium Tin Oxide Thin-Film Transistors for Dual-mode Proximity Sensing Application.

Abstract

Technologies for human-machine interactions are booming now. In order to achieve multifunctional sensing abilities of electronic skins, further developments of various sensors are in urgent demand. Herein, a dual-mode proximity sensor based on an oxide thin-film transistor (TFT) is reported. Although InSnO (ITO) is featured with high mobility, the inherent high carrier concentration limits its use as a channel material for thin-film transistors. Herein, the tungsten element was introduced as a carrier suppressor to develop ITO-based semiconducting materials and devices. TFTs with amorphous tungsten-doped ITO (ITWO) channel layers were fabricated. As for a flat panel display application, the TFT device from 250 °C-annealed ITWO layer with an atomic ratio of In/Sn/W = 86:9:5 presented the optimal device performance with carrier mobility of 11.53 cm2 V-1 s-1, swing subthreshold of 0.66 V dec-1, threshold voltage of -2.18 V, and Ion/Ioff ratio of 3.33 × 107 and much small hysteresis of transfer characteristic. ITWO TFT devices were further developed as dual-mode proximity sensors that could work with both extended-gate and compact configurations, where the drain current was directly related to the surface potential of a charged object and the distance between the sensing end and the object, enabling the proximity sensing of charged stimuli. For extended-gate-configured proximity sensing, a charged object modulated the formation of a conductive channel at the semiconductor/SiO2 interface, while this conductive channel occurred at the semiconductor/air interface for compact-configured sensing. Formation of the conductive channel of the compact transistor was modulated by the electric field component in the direction perpendicular to the interface, and the drain current was sensitive to the orientation of the approaching object, which implied the capacity of angle sensing to the approach of a charged object. This work further emphasizes that the basic device performance should be optimized according to its specific application scenarios rather than only considering the requirements of the panel display.