Tungsten-Based SOI Microhotplates for Smart Gas Sensors

Abstract

This paper is concerned with the design, fabrication, and characterization of novel high-temperature silicon on insulator (SOI) microhotplates employing tungsten resistive heaters. Tungsten has a high operating temperature and good mechanical strength and is used as an interconnect in high temperature SOI-CMOS processes. These devices have been fabricated using a commercial SOI-CMOS process followed by a deep reactive ion etching (DRIE) back-etch step, offering low cost and circuit integration. In this paper, we report on the design of microhotplates with different diameters (560 and 300 mum) together with 3-D electrothermal simulation in ANSYS, electrothermal characterization, and analytical analysis. Results show that these devices can operate at high temperatures (600degC ) well beyond the typical junction temperatures of high temperature SOI ICs (225degC), have ultralow dc power consumption (12 mW at 600degC), fast transient time (as low as 2-ms rise time to 600degC), good thermal stability, and, more importantly, a high reproducibility both within a wafer and from wafer to wafer. We also report initial tests on the long-term stability of the tungsten heaters. We believe that this type of SOI microhotplate could be exploited commercially in fully integrated microcalorimetric or resistive gas sensors.