Abstract

Magnetoelectric (ME) composites, which are magnetostrictive-piezoelectric composites, have garnered attention for use in various application fields owing to their large ME coupling compared with single-phase multiferroic materials. The maximum ME coupling is observed when an increased DC magnetic bias field is applied, which results in large devices with degraded sensitivity due to electromagnetic noise. To address this problem, a strong self-biased ME composite that generates the maximum ME response in a zero-bias field was proposed in this study. Highly self-biased ME composites were prepared by combining soft magnetic Ni and highly permeable Metglas magnetostrictive layers with a Pb(Mg1/3Nb2/3)O3–PbZrTiO3 piezoelectric single-crystal laminate structure and inducing a magnetization gradient. The maximum ME voltage value without a DC bias field was evaluated to be 4.2 V/cm∙Oe for an MMNPNMM (M: Metglas foil, N: nickel, P: PMN-PZT) structure, which is 625 % higher than that of conventional ME composites. Therefore, the relatively bulky means of the DC-bias application on ME materials could be eliminated, resulting in a simple ME device with a small volume using the magnetization gradient concept.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call