Tunable microlens array fabricated by a silicone oil-induced swelled polydimethylsiloxane (PDMS) membrane bonded to a micro-milled microfluidic chip.

Abstract

Microlens arrays (MLAs) nowadays are critical micro-optical components and they can be applied in many application fields, such as optical communication systems and flat panel display modules. This article describes a novel approach to the fabrication of tunable, highly reliable, and uniform polydimethylsiloxane (PDMS) MLAs. A polydimethylsiloxane (PDMS) membrane is bonded to a micro-milled poly(methyl methacrylate) (PMMA) microfluidic chip and exposed to silicone oil of a specific viscosity. Molecules in the oil insert themselves into the molecular structure of the PDMS membrane, causing it to swell and subsequently form dome-shaped MLAs. From our experiments, we derived the following conclusions. First, the homogeneous swelling of the PDMS resulted in MLAs with a high numerical aperture (0.5), high uniformity illumination (CV of the illumination intensity is between 2.5%∼5.1%), and high uniformity (CV of sag height of MLAs is less than 0.05). Second, the shorter molecular chains in low-viscosity oils diffused more readily into the PDMS membrane, which increased the effects on swelling, resulting in MLAs with higher sag height and higher numerical aperture. For example, the 5 cst silicone oil resulted in sag height of 191 µm with NA of 0.50, whereas the 100 cst silicone oil resulted in sag height of 86 µm with numerical aperture of 0.33. Finally, the integrated mixer module enabled the simultaneous tuning of the 7 × 7 MLAs simply by adjusting the injection flow rates of the constituent silicone oils.