Abstract
This paper presents the experimental verification of the tunable characteristics of a ferrite composite right/left handed coupled line coupler. The coupler is designed using two coupled CRLH-CRLH transmission lines. The coupler is designed to demonstrate equal through and backward coupling. The novel coupler has been designed and realized in coplanar waveguide configuration on a ferrite substrate. The tunable characteristics are achieved by changing the applied DC magnetic bias to the ferrite substrate. The measurement results reveal that the coupler’s fractional bandwidth can be tuned from 29% to 69% by varying the applied DC magnetic bias from 1000 Oe to 1750 Oe. Within the tunable bandwidth, the maximum backward coupling is −5 dB. The coupler has high forward coupling isolation, close to −30 dB at its centre operating frequency. In addition to its tuning capability, the coupler has the advantages of its compact size; it has the length of 11.5 mm and not-so-tight line separations of 2.5 mm. Furthermore the coupler only requires low DC magnetic bias.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: AEU - International Journal of Electronics and Communications
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
