Tunable Brillouin-erbium fiber laser producing multiwavelength cylindrical vector beams

Abstract

A multiwavelength Brillouin-erbium fiber laser producing cylindrical vector beams with tunable central wavelength and wavelength spacing is presented and experimentally investigated. Owing to the inhomogeneous broadening characteristic of the Brillouin gain, stable multiwavelength lasing is achieved by combination of the cascaded stimulated Brillouin scattering in the ultra-long single mode fiber and the wavelength selection of the fiber Mach-Zehnder interferometer. Multiwavelength lasing with tunable wavelength spacing of about 0.09, 0.11, 0.17, 0.24 and 0.3 nm is achieved by adjusting the optical delay line in the Mach-Zehnder comb filter. With the sufficient pump power, multiwavelength lasing with more than 10 channels is obtained when the wavelength spacing is tuned to be about 0.09 nm. Through adjusting the flat-top tunable bandpass filter, the central lasing wavelength can be tuned from 1534.37 nm to 1570.06 nm continuously. Cylindrical vector beams with purity higher than 93% are produced through regulating polarization controllers on either side of the two-mode long-period grating serving as the mode convertor. Multiwavelength cylindrical vector beams with the largest number of channels and tuning range are obtained to the best of our knowledge.