Tunable Acoustic Properties Using Different Coating Systems on Resonance Spruce Wood

Abstract

AbstractThe study investigates the effect of the type of varnish and the number of layers on some acoustic properties of the resonance spruce in combination with the changes produced in some physical, morphological, and chemical properties of wood. In addition to color changes and surface chemistry, the surface roughness and morphology are modified by the thickness of the varnish film, 10 layers being optimal from this point of view, as well as the oil‐based finish. The sound absorption coefficient increases with the number of varnish layers and varies with the sound frequency range, varnish type, and wood quality, all contributing to the acoustic tunability. For example, for a sound frequency of 1.5 kHz, it is observed that the oil‐based varnish with 5 and 10 layers contributes to a full sound, while the alcohol varnish, due to a lower absorption coefficient for this frequency, can lead to some nasal sounds. Applying more than 10 layers of varnish does not improve the sound performance as it will soften the sound in an oil‐based finish and make the sound too sharp in the case of alcohol–varnished wood.