Abstract

Biodegradable metals are being investigated as temporary implants that dissolve safely in the body after bone regeneration. Zinc (Zn) has an intermediate biodegradation rate between magnesium and stainless steels, yet its degradation rate is too slow to function as a temporary orthopedic implant. Alloying with nutrient elements is considered a strategy to tune its mechanical properties and in vivo biodegradability. Zn/calcium (Zn/Ca) alloys (with 0.5, 1, and 2 wt% Ca) were processed by spark plasma sintering and their microstructure, mechanical, and biodegradation properties were investigated. Ca was distributed in the grain boundary regions of Zn due to its low miscibility in Zn. Furthermore, the corrosion rates of Zn/Ca alloys determined from linear polarization measurements (0.164–0.325 mm/yr) accelerated by at least 10% compared with pure sintered Zn (0.149 mm/yr) with simultaneous dissolution of Zn and Ca, as verified from X-ray diffraction analysis of the corrosion products. The alloy specimens exhibited hardness (52–58 HV) and compressive strength (93–119 MPa) comparable with those of human cortical and cancellous bones (49 HV; 90–209 MPa). This study demonstrated the tunability of the mechanical and biodegradation properties of Zn-based materials by alloying them with a nutrient element for potential application as temporary orthopedic implants.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.