Tritium transport in the vacuum vessel pressure suppression system for helium cooled pebble bed

Abstract

In the frame of the safety studies for the EU-DEMO reactor, attention is paid to the hydrogen concentration in the vacuum vessel and connected volumes since it would lead to a possible hazard of releasing tritium and activated dust. The risk of explosion cannot be excluded a priori if H2 stockpiles. For this reason, in both water (WCLL) and helium (HCPB) cooled breeding blanket concepts of EU-DEMO, the problem is under investigation with a cross-reference between the available technologies in fission (such as the Passive Autocatalytic Recombiners – PAR) and fusion application. In particular, the recent analyses pointed out the implementation of the PARs into the Vacuum Vessel Pressure Suppression System or linked systems.This paper evaluates the Hydrogen behavior (main mobilized tritium source term) for the Helium-Cooled Pebble Bed (HCPB) VVPSS concept. The analyses preliminary investigate the stratification of the hydrogen mass inventory inside the PSS. In particular, a MELCOR 1.8.6 model of the PSS, based on past activities aimed at dust transport and thermohydraulic analyses, is adopted. The paper also introduces the applicability of PAR technology in the operation range of fusion devices, analyzing the problem of the recombination rate due to the dilution of Hydrogen after a Helium blowdown.