Tritium distributions on tungsten and carbon tiles used in the JET divertor

Abstract

Tritium distributions on the W-coated divertor tiles used with Be wall in JET 2011–2012 ITER-like wall (JET-ILW) campaign were measured using an imaging plate (IP) technique. The high intensity of photo-stimulated luminescence (PSL) from IP was observed at the regions covered by deposited Be layers. However, the PSL intensity was not simply proportional to the thickness of the deposited Be layers; the shadowed region of Tile 4 showed the highest PSL intensity though the thickness of deposited Be layer on this region was smaller than that on Tile 0 and the apron of Tile 1 by an order of magnitude. These observations indicated the influence of impurities such as oxygen on tritium retention in the deposited Be layers. The C tiles used in the 2007–2009 JET carbon wall (JET-C) campaign were also examined. The high PSL intensity was observed for the regions covered with deposited C layers in this case. The area of tile surfaces covered by the deposited tritium-rich layers on the W-coated-tiles used in the JET-ILW campaign was significantly smaller than that on the C tiles used in the JET-C campaign.