Triticale extrudates – Changes of macrostructure, mechanical properties and molecular water dynamics during hydration

Abstract

The effect of hydration (in the range of aw 0.981–0.090) on changes of macroscopic and mechanical features of triticale snacks produced in different conditions (feed moisture - 16 and 20%; extrusion temperature - 135 and 175 °C) was analysed. Changes of snacks depended both on the hydration level and the extrusion process conditions.As a result of storage at the highest hydration level (aw = 0.981) contraction of snacks was observed. The shrinkage was more pronounced in case of extrudates obtained from raw material containing 16% of water regardless of the extrusion temperature. The hardness of extrudates depended both on the feed moisture and hydration. Samples obtained from the raw material containing 20% moisture were harder than those prepared at the feed moisture of 16%. Based on the results of molecular dynamics study by low field NMR technique, a model of hydration was developed and critical hydration value of extruded snacks was calculated. Higher values of the critical hydration were obtained for snacks extruded at temperature 135 °C than for those obtained at 175 °C. The feed moisture level affected critical hydration values to a lesser extent. Obtained results suggest that the state of water in extrudates depends on extrusion process conditions.