Abstract
Ultra wide bands antennas with notched bands characteristics have recently been considered for efficient communication between devices. In this paper, a compact ultra-wideband antenna (UWB) for UWB applications with triple bandnotched characteristics is presented. The proposed antenna consists of a square patch with four truncated corners and a partial ground plane with a rectangular slit. The operation bandwidth of the designed antenna is from 2.66 GHz to more than 13.5 GHz. Band-notched characteristics of antenna to reject the frequency band of 3.18 - 3.59 GHz and 4.70 - 5.88 GHz, is realized by inserting two C-shaped slots in the patch, the third band of 9.54 - 12.22 GHz is achieved by slottype capacitively-loaded loop (CLL) inserted in the patch near the feed line. Details of the proposed antenna design and simulated results are presented and discussed.
Highlights
IntroductionUltra-wideband (UWB) communication systems have become one of the most fascinating wireless topic since the commercial uses of frequency band from 3.1 GHz to 10.6 GHz were approved by Federal Communications Commission (FCC) in 2002 [1]
Ultra-wideband (UWB) communication systems have become one of the most fascinating wireless topic since the commercial uses of frequency band from 3.1 GHz to 10.6 GHz were approved by Federal Communications Commission (FCC) in 2002 [1].to satisfy the increasing demand for wireless communication, various ultra-wideband antennas have been studied [2]
Band-notched characteristics of antenna to reject the frequency band of 3.18 - 3.59 GHz and 4.70 - 5.88 GHz, is realized by inserting two C-shaped slots in the patch, the third band of 9.54 - 12.22 GHz is achieved by slottype capacitively-loaded loop (CLL) inserted in the patch near the feed line
Summary
Ultra-wideband (UWB) communication systems have become one of the most fascinating wireless topic since the commercial uses of frequency band from 3.1 GHz to 10.6 GHz were approved by Federal Communications Commission (FCC) in 2002 [1]. To satisfy the increasing demand for wireless communication, various ultra-wideband antennas have been studied [2]. To satisfy such requirement various ultrawideband antennas with notched band have been studied [5,6,7,8,9,10,11,12,13,14,15,16,17] To introduce such a band-notched function, several methods have been proposed, including embedding a slot of different shapes in the radiating patch, or in the ground plane, using parasitic patches, embedding a slit in the feeding strip, or etching split ring resonator (SRR) coupled to the feed-line [9], or the CSRR (the negative image of SRR) structure [18]. The details of the proposed antenna are presented and the simulation of the VSWR and radiation patterns of antenna are presented and examined
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Electromagnetic Analysis and Applications
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
