Tribological roles of nanometre thick Ag layers on Hertzian macroscopic contacts

Abstract

Tribological performance of subnano to nanometre thick Ag layers deposited on Si(111) has been examined under ultra high vacuum conditions to understand effect of surface thin layers on the wear and friction characteristics. The slider was made of a diamond sphere 3 mm in radius. As a result, a minimum of the coefficient of friction 0·007 was observed over a film thickness range of 1·5–10 nm. The sliding planes were observed by Auger electron spectroscopy, reflection high energy electron diffraction (RHEED), synchrotron orbital radiated X-ray diffraction (SOR-XD) and scanning tunnelling microscopy (STM). No worn particles were found after 100 reciprocal sliding cycles, and the very low friction coefficient lasted for at least 1000 sliding cycles. Observations using STM on the sliding surfaces confirmed that the stacking Ag(111) planes slid. The SOR-XD and RHEED verified that a tribo-induced orientation of polycrystal film occurs as Ag(111) sliding planes are oriented parallel to the sliding direction on the track. The friction force of as deposited epitaxial Ag films as a function of the load was constant. On the other hand, in the 5 nm thick Ag films annealed to form complete single crystals, the friction coefficient showed a strong load dependency. At a load of 250 mN or more, the annealed films showed a low and static friction coefficient. These results suggested that the shearing resistance of nanometre thick Ag layers exhibits a strong anisotropic performance within the thickness range of nanometres, along with an orientation of Ag during sliding. Experimental results of sliding tests were discussed on the contribution of surface atoms to the friction, an extraordinarily low wear rate of the Ag layers, and the relationship between the nanoscopic structure and macroscopic tribological performance.