Abstract
AbstractThe effect of addition of multi-walled carbon nanotubes (MWCNTs) on the wear behaviour of glass/epoxy composites manufactured using the pre-preg method was investigated. The MWCNT filling rates were 0.5, 1, and 2 wt.%, and unfilled composite samples were used for comparison. The worn surfaces were characterised by means of scanning electron microscopy for evaluating the wear mechanisms. The experimental results showed that all the composites filled with MWCNTs have a lower wear loss than the unfilled composite sample, and the wear resistance increased with increase in the amount of MWCNTs. It is revealed that the abrasive wear resistance of the glass/epoxy composites is mainly related to the adhesion at the matrix and fibre interface.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.