Abstract
Numerous problems occur during engine operation, such as start-up, lack of lubrication, and overheating, resulting in engine components’ wear, power loss, and fuel consumption. Nanomaterials dispersed in engine oil can play an important role in improving the tribological properties of oil lubricants. This study investigated the influence of multi-walled carbon nanotubes (MWCNTs) and aluminum oxide nanoparticles (Al2O3 NPs) as nano-additives for lubricants. Different engine oil samples were loaded with 0.5–2.0 wt% Al2O3 NPs and 0.5–1.0 wt% MWCNTs and compared with unmodified oil. The tribological performance of the nano lubricants was investigated using the four-ball test method. In addition, the wear scar in the engine was evaluated using 3D micrographs and scanning electron microscopy (SEM). The results of the sliding surfaces with hybrid MWCNTs/Al2O3 NPs showed better friction performance and wear resistance. The coefficient of friction (COF) and wear scar width were improved by 47.9% and 51.5%, respectively, compared with unmodified oil.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
