Abstract
In this study, the tribological behaviors of Mo2BC ceramics against four different counterpart materials were studied. It was established that the tribological properties of Mo2BC were sensitive to the counterpart material. For the Mo2BC/SiC and Mo2BC/Al2O3 tribo-pairs, a layer of tribofilm, mainly consisting of MoO3, was generated owing to the tribo-oxidation reaction. However, the tribofilm did not provide lubrication under ambient conditions. Tribo-oxidation and adhesion wear were the main wear mechanisms. For the Mo2BC/Si3N4 tribo-pair, only minor MoO3 tribo-oxides were generated, and the tribo-pair showed better tribological properties; the friction coefficient was as low as 0.42. The dominant wear mechanism was two-body abrasion. The Mo2BC/GCr15 steel tribo-pair showed a high friction coefficient, owing to the adhesion effect of Fe.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.