Tribological behavior of laser textured rolling element bearings under starved lubrication

Abstract

PurposeThe purpose of this paper is to reveal the influence of dimples on the tribological properties of the “washers-cage-rollers” system of rolling element bearing (REB) under starved lubrication.Design/methodology/approachA fiber laser marking system was used to prepare dimples patterns on the raceways of the shaft washers of cylindrical roller thrust bearings (CRTBs). The friction and wear properties of dimples textured CRTBs with different diameter of dimples (200 µm, 250 µm, 300 µm) and depth of dimples (4 µm, 8 µm, 12 µm) were researched through a vertical universal wear test rig using a customized tribo-pair under starved lubrication. The surface stresses and the influence mechanism of dimple units on the tribological behavior of REBs were also compared and discussed.FindingsAlthough the surface stresses on the raceways of dimples textured bearings are significantly higher than that of the smooth group, the coefficients of friction and wear losses of them are all reduced under starved lubrication. When the effective volume of dimples is between 1.13 and 2.25 and the depth of dimples is smaller than 12 µm, the tribological properties of dimples textured CRTBs are significantly improved. In this work, when the diameter of dimples is 250 µm, and the depth of dimples is 8 µm, the textured bearings can provide the excellent friction-reduction ability and outstanding wear resistance.Originality/valueThis work is a valuable reference for the raceway design and optimization of REBs.