Abstract
In this paper, the tribological and rheological behaviors of nanorods–Al2O3 as an additive in lithium grease at different concentrations were investigated. The morphology of the additive was determined. The improvement in the rheological properties after adding the nanorods was studied and illustrated by measuring the wear of the tested surfaces. The results showed that nanorods–Al2O3 can greatly improve the lubricating effect of grease. The grease with a 0.3 wt% content of nanorods–Al2O3 exhibited the lowest average friction coefficient and wear scar diameter. The worn steel surface was smooth and showed few furrows and grooves. Moreover, a correlation was found between the tribological and rheological properties of lithium grease. By increasing the temperature continuously, a chemical protective film was produced leading to the reduction in the friction coefficient of grease.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
