Triaxial ball-impact piezoelectric converter for autonomous sensors exploiting energy harvesting from vibrations and human motion

Abstract

A piezoelectric converter for energy harvesting composed of a rigid ball enclosed among six piezoelectric diaphragms arranged in a cube-shaped structure is presented. When the converter is excited by mechanical vibrations, the ball repeatedly bounces and hits one or more diaphragms, implementing the impact technique in a multi-degree-of-freedom configuration. The structure is isotropic thus the converter is effective irrespective of the vibration orientation. The converter is particularly suitable for energy harvesting from low-frequency random vibrations, such as those provided by human motion. The triaxial ball-impact piezoelectric converter was designed, built and experimentally characterized in the laboratory, and then tied to the ankle of a person and tested during physical activity. While the person is running at 7km/h, a peak instantaneous power of up to 16mW is provided by each of the six piezoelectric diaphragms, while the average power is significantly lower. The converter was coupled to a tailored power management circuit which intermittently powers a battery-less wearable temperature sensor module. In about 260s of walking at 2km/h, an energy of 1.4mJ is extracted, stored into a 1-mF capacitor, and used to power the sensor module, which performs a temperature measurement and transmits the data to a receiver through a 433-MHz RF-UART link.