Tri-axial force sensor using a split-type optical sensor

Abstract

In this paper a force sensor is proposed which comprises a segmental photo-sensor facing a light source supported by an elastic frame, and in which measurements are taken of relative positions varying with an external force on the basis of output variations from each photo-sensor. The photo-sensor detects minute displacements of the light source with good reproducibility and high sensitivity, and gives a large output signal. Therefore, the amplifier may be a simple type and can be easily built in. Also, this force sensor has a simple structure. Thus, the force sensor in the present method is more compact and far less costly than a conventional force sensor which uses a strain gauge. In this work, studies were carried out on the basic structure for measuring displacements in three axial directions with one piece of quadri-segmental photo-sensor and, having established the principle, the team prepared a prototype tri-axial force sensor with a built-in amplifier. Experiments indicated that the prototype tri-...