Abstract
To collect fundamental data for the improvement of drinking water quality, focusing on the removal of 2-MIB, Geosmin, IPMP, IBMP and TCA, a total of 20m3/d pilot plant was operated with process schemes of GAC with post-O3(PP-I), and without ozonation(PP-II). Five taste and odor causing substances could be removed to non-detectable concentration with PP-I, but GAC alone was not so effective as PP-I. The larger the EBCT and Iodine Number of GAC column employed, the higher the removal efficiencies expected. The minimum EBCT and Iodine Number were respectively 15 min and 1,000 mg/g of GAC column. Geosmin removal efficiencies ranged 30 to 40% at 15.6 ng/l during conventional process scheme, but 70 to 80% removal was achieved by the PP-I and 60 to 70% by PP-II was achieved. IPMP removal efficiencies were 60 to 80% with GAC only. IBMP and TCA were seldom detected in raw water samples, but TCA was the most difficult to remove of five taste and odor causing substances.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
