Abstract
Application of membrane extraction process to the removal of phenol from its aqueous solution was investigated. The ability of poly (dimethylsiloxane), i.e. PDMS and poly (methyl vinyl) siloxane (PVMS) in the membrane extraction of water–phenol mixtures was compared. It was found that PDMS was more suitable for the operation under strong base condition. PDMS and sodium hydroxide solution were applied in the process. The effects of feed flow rate, phenol concentration, temperature and pH in the stripping solution and ionic strength on the process were studied. The effects of liquid flow status and system temperature on the membrane surface on the overall mass transfer coefficient (OMTC) and the permeability for phenol through the membrane were also discussed. The experimental results showed that the phenol removal efficiency was over 95% under the conditions of a flow rate 2.0 l·d –1, phenol >5000 mg·l –1, at 323.2 K and pH 13.0. OMTCs increased with increasing salt concentration. The order of OMTC was 10 –7 m·s –1, and the experimental data was agreement with the Arrhenius relationship for the temperature dependence of the permeability of phenol through the polymer.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
