Abstract
This paper investigates the traveling and abrasion characteristics of rigid wheels for a lunar exploration rover at atmospheric pressure and in a vacuum. For this investigation, a traveling test system that enables the wheel to continuously travel over a long distance was developed. Using this system, tests on traveling performance and abrasion were conducted with the wheel on a lunar regolith simulant surface. In the initial tests, various wheels traveled over different ground conditions and their performances were evaluated based on the relationship between the drawbar pull and slippage. In the later tests, a wheel with grousers traveled a distance of 3km and the abrasion was analyzed at various intervals. From the traveling performance tests, it was found that for a soft ground condition, the traveling performance of the wheels in vacuum was slightly lower than that in atmosphere. This indicates that ground tests performed in atmosphere overestimate the actual performance on the lunar surface. The abrasion tests suggested that the scratching of wheels occurs more easily in vacuum than in atmosphere. These experiments confirmed that the abrasion of the wheels do not cause any critical problem for a traveling distance of up to 3km in a simulated lunar environment.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
