Trap Level Characteristics and DC Breakdown Performance of Isotactic/Syndiotactic/Atactic Polypropylene Blend Insulation

Abstract

Polypropylene (PP) material as a DC cable insulation material has great prospects as a recyclable alternative to cross-linked polyethylene. This paper aims at investigate the effect of PP blends crystallinity morphology and trap energy level distribution on DC breakdown strength. Five different ratios iPP/sPP/aPP blends samples are prepared by melt-blending method. Polarizing optical microscope (POM) experiments are conducted to characterize the crystallinity morphology of five iPP/sPP/aPP blends and isothermal surface potential decay (ISPD) methods are employed to measure the trap levels distribution in composite dielectric. The DC breakdown strength is tested by ball-plate electrodes equipment, and the result of DC breakdown experiment indicates that sPP30 exhibits the highest breakdown field strength, which is 29.2% higher than sPP0. The addition of sPP can act as a nucleus to help the crystallization behavior of iPP, and the distribution of spherulites in sPP30 is the most uniform and dense among the five iPP/sPP/aPP blends samples, which can improve the trap characteristics of polymers. The ISPD results show that the decay rate of the sPP30 sample is the slowest at 50 °C, 70 °C and 90 °C, indicating that sPP30 is more conducive to suppressing the dissipation process of carriers during the depolarization process. Moreover, sPP30 has higher deep trap density and lower shallow trap density and exhibits superior breakdown performance. It is deduced that the addition of sPP can effectively regulate the crystallinity morphology of iPP, and then effectively improve the trap energy level distribution of iPP/sPP/aPP blends, and it shows the improvement of DC breakdown performance macroscopically.