Abstract

Shea nut shell, an abundant and low cost agricultural waste product was used to prepare activated charcoal by means of two step process using H3PO4 and ZnCl2 as an activating agents. The percentage activation burn off increased with increasing activation dwell time, while the percentage yield decreased. The highest chemical oxygen demand (COD) removal from industrial effluent were reported to be 59.99, 56.64, 51.62, 59.97, 53.32 and 59.99% for the series of adsorbents indicated as SS/H3P04/5, SS/H3P04/10, SS/H3P04/15, SS/ZnCl2/5, SS/ZnCl2/10 and SS/ZnCl2/15 respectively and thus implies that the salt catalyzed shea nut shell adsorbent were more effective than the corresponding acid modified biosorbent. Pseudo-first-order and Pseudosecond- order model were selected to study the adsorption kinetic. The removal of COD could be best described by the Psoudo-second-order model and the result also revealed that the activated charcoal produced from shea nut shell was very effective in removing COD from industrial effluent.Keywords: Activated carbon, chemical oxygen demand, kinetic model, dye, adsorbent

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.