Transport characterization of membranes for immunoisolation

Abstract

This study relates to the diffusive transport characterization of hollow fibre membranes used in implantable bio-hybrid organs and other immunoisolatory devices. Techniques were developed to accurately determine the mass transfer coefficients for diffusing species in the 10 2–10 5 MW range, validated and then used to study one membrane type known to effectively immunoisolate both allografts and xenografts in vivo. Low-molecular-weight diffusing markers included glucose, vitamin B 12 and cytochrome C; higher-molecular-weight molecules were bovine serum albumin, immunoglobulin G, apoferritin and a range of fluorescein-tagged dextrans. Overall and fractional mass transfer coefficients through the hollow fibres were determined using a resistance-in-series model for transport. A flowing dialysis-type apparatus was used for the small-molecular-weight diffusants, whereas a static diffusion chamber was used for large-molecular-weight markers. For diffusion measurements of small-molecular-weight solutes, convective artefacts were minimized and the effect of boundary layers on both sides of the membrane were accounted for in the model. In measuring diffusion coefficients of large-molecular-weight species, boundary layer effects were shown to be negligible. Results showed that for small-molecular-weight species (< 13000 MW) the diffusion coefficient in the membrane was reduced relative to diffusion in water by two to four times. The diffusion rate of large-molecular-weight species was hindered by several thousand-fold over their rate of diffusion in water.