Abstract
Incineration studies of plutonium were carried out at the Synchrophasotron of the Joint Institute for Nuclear Research (JINR), Dubna, using proton beams with energies of 0.53 GeV and 1.0 GeV. Solid lead targets (8 cm in diameter and 20 cm long) were surrounded with 6 cm thick paraffin as neutron moderator and then irradiated. The transmutation of 239 Pu and the associated production of fission products 91 Sr, 92 Sr, 97 Zr, 99 Mo, 103 Ru, 105 Ru, 129 Sb, 132 Te, 133 I, 135 I and 143 Ce were studied in the present work. The plutonium samples (each 449 mg) were placed on the outer surface of moderator. For 1.0 GeV proton beam, the fission rate of 239 Pu is 0.0032 atoms per proton in one gram plutonium samples, for 0.53 GeV proton, this value is 0.0022. The experimental uncertainty is about 15%. The experiments are compared to two theoretical model calculations with moderate success, using the Dubna Cascade Model (CEM) and the LAHET code. The practical incineration rate of 239 Pu is very high. For example: if one uses 10 mA, 1 GeV proton beams under the same (fictive) experimental conditions, the incineration rate of 239 Pu via fission is 3 mg out of the 449 mg sample per day. For 0.53 GeV protons the corresponding rate is 2 mg per day.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have