Abstract
We examined the effect of an antireflection (AR) coating to enhance the TM transmittance of the wire-grid polarizer. The polarization transmission spectra were calculated using the rigorous coupled-wave analysis. As a result, we verified that an AR film should be inserted between a wire-grid and a Si substrate as regards the TM transmittance and the polarization function. Based on the simulation results, we fabricated a tungsten silicide (WSi) wire-grid polarizer with SiO films on both sides of the Si substrate. The transmittance exceeded 80% at a 4-5 microm wavelength range, although the theoretical transmittance of Si substrate is 54% and the ratio of the TM and TE transmittances reached 24 dB at a 3 microm wavelength when the WSi grating has a 300 nm thickness, a 400 nm period, and a fill factor of 0.6. Wire-grid polarizers with higher transmittance and larger extinction ratio can be obtained by adjusting the AR film thickness, the fill factor, and the thickness of the WSi grating.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
