Transmission of roll and pitch seat vibration to the head.

Abstract

A series of experiments has investigated the transmission of roll and pitch seat vibration to the heads of seated subjects. Head motion was measured in all six axes using a light-weight bite-bar while seated subjects were exposed to random motion at frequencies of up to 5 Hz at 1.0 rad.s -2 r.m.s. Subjects sat on a rigid flat seat in two body postures: 'back-on' (back in contact with backrest) and 'back-off' (no backrest contact). The influence of the position of the centre of rotation was also investigated. Motion at the head occurred mostly in the lateral, roll and yaw axes during exposure to roll seat vibration and in the fore-and-aft, vertical and pitch axes during exposure to pitch seat vibration. A reduction in the magnitude of head motion occurred when the subjects sat in a 'back-off' posture compared with a 'back-on' posture. Varying the position of the centre of rotation along the lateral axis during roll seat vibration affected vertical and pitch head motion: least head motion occurred when the centre of rotation was in line with the subject's mid-sagittal plane. Varying the position of the centre of rotation along the vertical axis during roll seat vibration affected head motion in the mid-coronal plane: roll head motion decreased as the position of the centre of rotation was raised from below the seat surface to above the seat surface. Varying the centre of rotation (along the fore-and-aft and vertical axes) during pitch seat vibration altered head motion in the mid-sagittal plane.(ABSTRACT TRUNCATED AT 250 WORDS)