Abstract

A two-dimensional numerical study of flow across rows of identical square cylinders arranged in staggered fashion is carried out. This study will unreveal complex flow physics depending upon the Reynolds number (Re) and gap spacing (g) between the cylinders. The combined effect of Reynolds number and gap spacing on the flow physics around staggered rows of cylinders are numerically studied for 20 ≤ Re ≤ 140 and 1 ≤ g ≤ 6. We use the lattice Boltzmann method for numerical computations. It is found that with increase in gap spacing between the cylinders the critical Reynolds number for the onset of vortex shedding also increases. We observed a strong effect of Reynolds number at g = 2 and 4. Secondary cylinder interaction frequency disappears for large Reynolds number at g = 6 and 5 and the flow around cylinders are fully dominated by the primary vortex shedding frequency. This ensures that at large gap spacing with an increase in the Reynolds number the wakes interaction between and behind the cylinders is weaken. Furthermore, it also ensures that the wake interaction behind the cylinders is strongly influenced by the jets in the gap spacing between the cylinders. We also found that g = 2 is the critical gap spacing for flow across rows of staggered square cylinders for the considered range of Reynolds number. Depending on the Reynolds number we observed; synchronous, quasi-periodic-I, quasi-periodic-II, and chaotic flow patterns. In synchronous flow pattern, an in-phase and anti-phase characteristics of consecutive cylinders has been observed. The important physical parameters are also analyzed and discussed in detail.

Highlights

  • The numerical results of two-dimensional flow across two rows of identical square cylinders in staggered arrangement are reported in this study using a lattice Boltzmann method

  • It is found that the critical Reynolds number, at which onset of vortex shedding occurs, increases with an increase in gap spacing between the cylinders

  • It is observed that the Reynolds number have substantial effect on the flow characteristics especially at g = 4 and 2

Read more

Summary

Introduction

Yan et al [9] experimentally and numerically studied the characteristics of flow around three staggered circular cylinders using the multiple-relaxation-time lattice Boltzmann method (MRT-LBM) They found the steady and unsteady flow regions behind the upstream cylinder by varying the gap spacing between the cylinders from 1 to 10 at a fixed Reynolds number (Re = 200). Sewatkar et al [12] carried out numerical simulation of the flow past a row of square cylinders They studied the combined effects of Reynolds number and gap spacing between the cylinders for 30 Re 140 and 1 g 4. Moussaoui et al [13] numerically examined the flow characteristics and heat transfer past three staggered square cylinders using the MRT-LBM They studied the combined effect of Reynolds numbers (10 Re 100) and gap spacing (1 g 2) between the cylinders.

Problem description and numerical details
 10À 6: ð9Þ
Results and discussions
Conclusions
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call