Abstract
Transition liquid phase (TLP) bonding has been conducted on a Hastelloy X using amorphous foil filler metals. The inserted fillers were made by rapid solidification of a Ni-15% Cr alloy containing 3 to 5 mass% boron as a melting point depressant. The microstructural change with isothermal bonding time from 2.4 to 38.4 ks was examined in the bond regions by optical microscopy and electron probe microanalysis (EPMA). An assessment of the bond strength was made by stress rupture tests performed at 1173 K. It was found that rupture strain and rupture life increased with increasing bonding time. A bond efficiency greater than 80% was achieved when the bonding time was 38.4 ks.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
