Year-end Sale % OFF 
Abstract
The growing interest in low-dose (< 100 Gy) radiation processing applications has raised concerns about accurately measuring the absorbed dose in irradiated materials. Depending on the irradiator design, the transit time due to the radioactive source movement (or the product itself) until the stable irradiation position might affect the predicted absorbed dose. This work aims to evaluate the transit dose in a 60Co Gammacell 220-Nordion irradiator, which has radioactive sources settled at the bottom of a lead shielding. When the facility is on, the product and the dosimeter are mechanically guided down to the irradiation position, and hereafter the selected exposure time starts to be counted. At the end of irradiation, both product and dosimeter rise to the initial position enabling them to be gathered by the operator. The product is continuously irradiated at different dose rates during its fall and rise movement, preventing the transit dose from being obtained straightforward. The experimental approach adopted is to assess the transit time, and thus the transit dose, using an online diode-based dosimetry system previously calibrated against reference standard alanine dosimeters. The agreement between the transit doses attained with the diode (0.41 ± 0.02) Gy and alanine ((0.38 ± 0.01) Gy validates the method herein proposed.
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
