Transient temperature calculation method for complex fluid-solid heat transfer problems with scattering boundary conditions

Abstract

A calculation method for engine temperatures is presented. Special focus is placed on the transient and scattering boundary conditions within the combustion chamber, including fired and coasting conditions, as well as the dynamic heat transfer of the water jacket. Model reduction is achieved with dimensional analysis and the application of probability density functions, which allows for a timescale separation. Stationary in-cylinder pressure measurements are used as input values and, according to the transient behavior, modified with an own part-load model.A turbocharged spark ignition race engine is equipped with 70 thermocouples at various positions in proximity to the combustion chamber. Differentiating from already published works, the method deals with the transient engine behavior during a race lap, which undergoes a frequency range of 0.1–1 Hz. This includes engine speed build-ups under gear changes, torque variations, or the transition from fired to coasting conditions.Different thermal behaviors of various measuring positions can be simulated successfully. Additionally, cylinder individual temperature effects resulting from an unsymmetrical ignition sequence and different volumetric efficiencies with unequal residual gas can be predicted. Up to a few percent, the energy balance of the water jacket is fulfilled and variations of water inlet temperatures can be simulated accurately enough.