Abstract
TLP diffusion bonding of two dissimilar aerospace alloys, Ti–6Al–4V and Al7075, was carried out at 500 °C using 22 μm thick Cu interlayers for various bonding times. Joint formation was attributed to the solid-state diffusion of Cu into the Ti alloy and Al7075 alloy followed by eutectic formation and isothermal solidification along the Cu/Al7075 interface. Examination of the joint region using SEM, EDS and XPS showed the formation of eutectic phases such as, Ө(Al 2Cu), T(Al 2Mg 3Zn 3) and Al 13Fe along grain boundaries within the Al7075 matrix. At the Cu/Ti alloy bond interface a solid-state bond formed resulting in a Cu 3Ti 2 phase formation along this interface. The joint region homogenized with increasing bonding time and gave the highest bond strength of 19.5 MPa after a bonding time of 30 min.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
