Abstract
Transient liquid phase bonding of graphite to Ti6Al4V alloy has been conducted with Cu foil, Ti/Cu and Cu/Ti/Cu foils, respectively. A diffusion zone containing Ti-based solid solution and Ti2Cu develops between the bonding zone and Ti6Al4V substrate for all the joints. The bonding zones of joints with Cu foil and Cu/Ti/Cu foils are both composed of TiCu and Ti2Cu. However, the bonding zone of joint with Ti/Cu foils consists of zones I, II and III. Both zones I and III are mainly comprised of TiCu and Ti2Cu, while zone II is a Ti residual zone. The joints with Cu/Ti/Cu foils exhibit the highest shear strength of 17.5 ± 1.7 MPa due to the most favourable interfacial bonding.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
