Transient conjugate heat transfer from a hemispherical plate during free liquid jet impingement on the convex surface

Abstract

This paper considers the analysis of transient heating of a hemispherical solid plate of finite thickness during impingement of a free liquid jet. A constant heat flux was imposed at the inner surface of the hemispherical plate at t = 0 and heat transfer was monitored for the entire duration of the transient until a steady state condition was reached. Calculations were done for Reynolds number (Re) ranging from 500 to 1,500 and dimensionless plate thicknesses to nozzle diameter ratio (b/d n) from 0.083 to 1.5. Results are presented for local and average Nusselt number using water as the coolant and various solid materials such as silicon, constantan, and copper. It was detected that increasing the Reynolds number decreases the time for the plate to achieve the steady-state condition. Also, a higher Reynolds number increases the Nusselt number. Hemispherical plate materials with higher thermal conductivity maintain lower temperature non-uniformity at the solid–fluid interface. Increasing the plate thickness decreases the maximum temperature in the solid and increases the time to reach the steady-state condition.