Transformational-Decomposition-Method-Based Semianalytical Solutions of the 3D Problem of Oil Production from Shale Reservoirs

Abstract

SummaryThe primary objective of this study is to develop fast analytical and/or semianalytical (A/SA) solutions for the problem of liquid flow/production and pressure interference in multifractured systems between parallel horizontal wells in ultralow-permeability reservoirs. We propose a new A/SA method that reduces the 3D flow equation into either a simple algebraic equation or an ordinary differential equation (ODE) in a multitransformed space, the inversion of which yields solutions at any point in space and time.In the proposed transformational decomposition method (TDM), a general, fully linearized form of the 3D partial-differential equation (PDE) describing low-compressibility liquid flow through porous and fractured media is subjected first to Laplace transforms (LTs) to eliminate time, and then to successive finite cosine transforms (FCTs) that eliminate either all three dimensions, yielding a simple algebraic equation, or two dimensions, yielding an ODE in space only. Inversion of the solutions of the multitransformed space equations provides solutions that are analytical in space and semianalytical in time. The TDM completely eliminates the need for time and space discretization, thus dramatically reducing the input-data requirements and long execution times of numerical simulations.The Fortran 95 code for the TDM solutions requires limited inputs and is easy to use. Because of the linearity requirements of the Laplace transformation of the underlying PDE, the TDM is only rigorously applicable at greater than the bubblepoint pressure. Using 3D stencils (the minimum repeatable elements in the horizontal well and hydraulically fractured system) as the basis of our study, solutions over extended production times were obtained for a range of isotropic and anisotropic matrix and fracture properties, constant and time-variable production regimes (rates or bottomhole pressures), combinations of stimulated reservoir volume (SRV) and non-SRV subdomains, variable hydraulic-fracture (HF) dimensions, and inner and boundary (toe and heel) stencils.The results were compared with analytical solutions (available for simple problems and domain geometries), as well as with numerical solutions from a widely used, fully implicit 3D simulator that involves very fine discretization of a 3D domain comprising more than 356,000 elements. The TDM solutions were shown to be in excellent agreement with the reference analytical and/or numerical solutions, while requiring a fraction of the memory and execution times of the latter because of the elimination of the need for time and space discretization.The TDM is an entirely new approach for the analysis of low-compressibility liquid flow and pressure interference in hydraulically fractured ultralow-permeability reservoirs. The TDM solutions have the potential to provide a reliable and fast tool to identify the dominant mechanisms and factors controlling the system behavior and can act as the basis for a rapid initial parameter identification in a history-matching process for possible further refinement using full numerical modeling at less than the bubblepoint pressure.