Abstract
Two low-transformation-temperature weld metals, 12Cr6Ni and 8Cr10Ni weld metals, were devised and their martensite start temperatures were 245°C and 225°C, respectively. Despite a small difference of 20°C in martensite start temperature, the martensite finish temperature of the former was 100°C, while the one of the latter was below room temperature. The difference in martensite finish temperature was due to the stacking fault energy. Lower stacking fault energy accelerated martensitic transformation, thus elevating martensite finish temperature. Owing to difference in martensite finish temperature, the microstructures, mechanical properties and residual stress of low-transformation-temperature weld metals varied correspondingly. Furthermore, experimental and finite-element study indicated that volume expansion strain and martensitic transformation temperature range strongly affected residual stress.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
